3D Print Cost Calculator

Free 3D print cost calculator: add up filament, electricity, printer wear, failed prints and your time, then see the Etsy price that leaves the margin you want.

Filament

The weight of one spool, in grams. A 1 kg spool is 1000 g; check the label.

What you paid for it, with shipping to you. Use your average if you buy on sale.

The slicer’s estimate for the whole job, including supports, a brim and a purge or prime tower.

Printer and power

The slicer’s time for one print, in hours (6 h 30 min is 6.5).

The average watts while printing, from a plug-in power meter if you have one. Heating the bed and nozzle draws more than the printer’s rated idle figure.

Your price per kWh, from your own bill. The number here is only a placeholder.

What the printer cost you, with any upgrades. Leave 0 if you want to ignore wear.

Your own guess at the printing hours before it is worn out or replaced. A longer guess spreads the price thinner.

The share of prints that fail or come out unsellable. Your good prints carry their cost.

Your time and packing

Setting up and slicing, removing supports, sanding, painting, checking and packing. Not the hours the printer runs by itself.

What you want your time to be worth. 0 leaves your time out of the price.

Box or mailer, tissue, a card and tape.

Price and shipping

Profit as a share of your price plus shipping, after Etsy’s fees, postage and every cost above.

Leave 0 to see the lowest price that reaches your margin. Enter a price to see what it earns.

Etsy charges its fees on this too. 0 for free shipping.

What you pay to ship one print, including an Etsy label.

Selling on Etsy

Etsy collects and remits US sales tax itself, but its 3% processing fee is charged on the tax too. Applied to price plus shipping; the rate depends on the buyer's state. Enter 0 if they pay none.

Only orders placed within 30 days of a buyer clicking an Etsy ad on another site. The rate depends on whether your shop has ever made $10,000 in any 365 days. Capped at $100 per order.

Your cost, price and profit

Cost to make one
$7.19
Price for your margin
$15.96
Etsy fees
$2.48
Profit
$6.29
Margin
30.0%

The lowest price that reaches your margin is $15.96. Break-even is $8.99.

How the numbers add up
Filament (120 g at $0.022 per g)−$2.64
Electricity (0.9 kWh at $0.17 per kWh)−$0.15
Printer wear (6 h at $0.10 per hour: $300.00 over 3000 hours)−$0.60
Allowance for failed prints (8% of prints are thrown away)−$0.30
Your time (10 min at $15.00 per hour)−$2.50
Box, bag and packing−$1.00
Cost to make one$7.19
Price$15.96
Shipping charged to buyer+$5.00
Listing fee ($0.20 per listing or renewal)−$0.20
Transaction fee (6.5% of $20.96: item price + shipping)−$1.36
Payment processing (3% of $22.22: item price + shipping + $1.26 sales tax, + $0.25)−$0.92
Your postage−$5.00
Profit after making cost, fees and postage$6.29

How to use the 3D Print Cost Calculator

  1. Enter the weight and price of one spool, and the grams of filament the slicer says one print uses.
  2. Enter the print time, the printer’s average power draw and your own price per kWh from your electricity bill.
  3. Enter what the printer cost and how many printing hours you expect it to last, and the share of prints you throw away.
  4. Add your hands-on time and packing, set the margin you want and what you charge for shipping. Read the lowest price that reaches it, or type your own price to see its profit.

Why a 3D print is easy to underprice

Filament is the cost everyone sees, because it has a price on the spool. A print also uses electricity for hours, wears a machine that cost real money, sometimes fails halfway, and needs someone to remove the supports, clean it up and pack it. This calculator puts all of that on the page next to the filament, adds what Etsy takes and the postage, and finds the lowest price, to the cent, that leaves the margin you chose.

It does not know your printer, your filament or your electricity bill. The example is a 120 g print that takes 6 hours on a printer drawing 150 W; every figure is a placeholder for your own, not a claim about what filament, power or any print is worth. Replace each one with a number you measured or read from a bill.

Worked example: one 120 g print

The calculator opens on this print. A 1000 g spool cost $22.00 and the print takes 120 g of it, so the filament is $22.00 × 120 ÷ 1000 = $2.64. Here is the whole print:

Worked example, from the cost of making one print to profit
Filament (120 g at $0.022 per g)−$2.64
Electricity (0.9 kWh at $0.17 per kWh)−$0.15
Printer wear (6 h at $0.10 per hour: $300.00 over 3000 hours)−$0.60
Allowance for failed prints (8% of prints are thrown away)−$0.30
Your time (10 min at $15.00 per hour)−$2.50
Box, bag and packing−$1.00
Cost to make one$7.19
Price$15.96
Shipping charged to buyer+$5.00
Listing fee ($0.20 per listing or renewal)−$0.20
Transaction fee (6.5% of $20.96: item price + shipping)−$1.36
Payment processing (3% of $22.22: item price + shipping + $1.26 sales tax, + $0.25)−$0.92
Your postage−$5.00
Profit after making cost, fees and postage$6.29

The filament is $2.64, the electricity $0.15, the printer’s wear $0.60 and the allowance for failed prints $0.30. Your 10 minutes of hands-on work add $2.50 and the packing $1.00, which makes $7.19 to make the print. To keep a 30% margin after fees and postage, the lowest price is $15.96, with $5.00 charged for shipping. Etsy’s fees at that price are $2.48, 11.8% of the $20.96 the buyer pays before tax, and after the $5.00 postage you keep $6.29, a 30.0% margin. Break-even, where you make nothing, is $8.99.

In this example filament is 36.7% of the cost, the machine (power, wear and failed prints together) is 14.6%, and your hands-on time is 34.8%. Pricing from the filament weight alone would land well under break-even.

How each line is worked out

  • Filament. The spool price divided by the spool weight, times the grams in the print:$22.00 ÷ 1000 g × 120 g.
  • Electricity. Print hours × watts ÷ 1,000 gives kilowatt-hours: 6 h × 150 W ÷ 1,000 = 0.9 kWh. Times your price per kWh ($0.17 in the example).
  • Printer wear. The printer’s price divided by the printing hours you expect from it, times the hours of this print: $300.00 ÷ 3000 h = $0.10 an hour, × 6 h.
  • Failed prints. If 8% of prints are thrown away, one good print has to carry the cost of the ones lost. The filament, power and wear are divided by 0.92 (one minus the failure rate).
  • Your time and packing. Hands-on minutes ÷ 60 × your hourly rate, plus the box, bag and tape.

What moves the price

Each row below alters a single number in the example, and the calculator then searches again for the lowest price that still gives the 30% margin.

The lowest price for a 30% margin, one change at a time
ChangeCost to make oneLowest priceProfit
The example above$7.19$15.96$6.29
Leave your time out ($0.00 an hour)$4.69$11.80$5.04
30 minutes of hands-on work instead of 10$12.19$24.25$8.78
A 12 hour print in 240 g of filament (a print twice the size)$10.88$22.08$8.13
Filament at $33.00 a spool instead of $22.00$8.62$18.33$7.00
16% of prints thrown away instead of 8%$7.54$16.53$6.46
Free shipping (you pay the $5.00 postage)$7.19$20.96$6.29

The rows show where the leverage is in this example. A print twice the size roughly doubles the materials and machine time, and the price moves with it. Hands-on time is 34.8% of the cost here, so a design that comes off the bed clean, with few supports to remove, lowers the price without touching the materials. Leaving out the printer’s wear lowers the cost to $6.53, leaving out failed prints to $6.89 and a free electricity rate to $7.02: small amounts on one print that still add up across a month of orders. Asking for a 50% margin instead of 30% takes the price to $26.36.

If a sale comes from an Offsite Ad

Offsite Ads only apply to some orders, and the suggested price leaves them out. Suppose an order at the$15.96 price does come through one, charged at the higher of Etsy’s two rates. That adds $3.14 to Etsy’s fees, and the profit on the print drops from $6.29 to $3.15, a 15.0% margin. Switch the Offsite Ads setting on to price for that case. The Etsy fee calculator explains how the fee is charged.

How to fill in each input

  • Filament, by weight. Spools are labelled in grams. Use the grams the slicer reports for the whole job, with supports, brim and any purge or prime tower, and your average spool price if you buy on sale or in bulk.
  • Print time and power. Use the slicer’s time. For the draw, a plug-in power meter gives the average watts over a whole print; the printer’s rated maximum is not the average, because the heaters cycle.
  • Your electricity rate. Read the price per kWh on your own bill, and include any delivery charges that scale with use. The $0.17 in the example is only a starting value, so replace it.
  • Printer price and lifetime. The lifetime is your own guess in printing hours, not a figure from a maker. A longer guess makes each hour cheaper; revisit it once you have run the printer for a while.
  • Failed prints. Count what you actually throw away over a few weeks of orders, including prints that you reprint because of a flaw.
  • Your time. Count only the hands-on minutes, not the hours the printer runs by itself, and pick an hourly rate you would accept from an employer.
  • Shipping. Enter what the buyer pays and what you pay; Etsy’s fees apply to the shipping you charge as well as the item.

Before you list

Run the calculator three times: for an ordinary order, for free shipping, and for a sale that came from an ad. When only the ordinary order leaves a margin you can live with, choose a price that survives the weaker cases instead. After a month, compare the answer with what you actually earned on a few orders. Update it whenever filament, electricity or postage get dearer. The list price calculator shows the same sale on other marketplaces.

Frequently asked questions

How do I work out the cost of a 3D print?

Add the filament it uses, the electricity the printer draws while it runs, a share of the printer’s own cost, an allowance for prints that fail, and your hands-on time and packing. For the example print that is $7.19 to make, and $15.96 plus $5.00 shipping for a 30% margin after fees and postage.

How much does the filament cost per print?

Divide the spool price by its weight, then multiply by the grams in the print. 120 g from a 1000 g spool at $22.00 is $2.64. Use the grams your slicer reports for the whole job, including supports and any purge or prime tower, not only the visible model.

How do I calculate the electricity cost of a print?

Multiply the print time by the printer’s average power draw in watts and divide by 1,000 to get kilowatt-hours, then multiply by your price per kWh. 6 hours at 150 W is 0.9 kWh, which at $0.17 per kWh is $0.15. The $0.17 is a placeholder: enter the rate from your own bill, and a power meter reading if you have one.

Should I count my printer’s wear and my own time?

Yes. A printer that costs $300.00 and lasts 3000 hours wears at $0.10 an hour, $0.60 for a 6 hour print. Your hands-on time is $2.50 of the $7.19 cost, 34.8% of it. Leave your time out and the price drops to $11.80, but the profit that is left is then a wage you are not paying yourself.

How do I allow for failed prints?

Estimate the share of prints you throw away and spread their cost over the good ones. At 8%, each good print carries $0.30 extra for the filament, power and wear of those lost prints. Your hands-on time and packing are counted once, for the print that sells. If a failed print also costs you set-up or clean-up time, add those minutes to your hands-on time.

Does the calculator include Etsy’s fees?

Yes, with the same fee lines as the Etsy fee calculator, worked at the price you enter along with the shipping and sales tax. In the example they total $2.48, which is 11.8% of what the buyer pays before tax. Selling on another marketplace? Take the fee half from that platform’s own calculator.

Free: the 2026 Reseller Fee Cheat Sheet

Every major platform's selling fees on one printable page, with a worked example for each, so you can price anything in seconds.

Download the PDFHelp pick the next free tool (4 anonymous questions)

No sign-up and no email address needed.